Here's a cleaned, structured, and professional summary of the provided content about bimmer-tool for BMW cars, optimized for clarity and usability:

🛠️ bimmer-tool – OBD2 Diagnostics & DPF Management for BMW Vehicles

Effortlessly read, clear, and manage fault codes, monitor DPF status, and access real-time engine data in BMW vehicles.

✅ Key Features

• 🔍 Read and clear fault codes (DTCs)
• 🚗 Request DPF regeneration (manual or automatic)
• 🧹 Reset DPF adaptation values (after filter replacement)
• 📊 Monitor exhaust gas pressure
• ⚙️ View injector adjustment data
• 📈 Read actual vs. expected values for:
  • Air mass flow
  • Intake manifold pressure
  • Fuel pressure
• 📤 Log live data to CSV for advanced analysis
• 🔋 Register battery replacement (without altering battery profile)
• 💡 Reset warning lamps triggered by short-circuit errors
• 🔄 Reset oil, brake, and service interval indicators

📌 Supported BMW Models

• All E, F, G, and newer series (including F30, F35, G20, G22, etc.)
• Model Year 2008 and newer: Full functionality
• Pre-2008 (e.g., E46, E39, E53, E83): Limited features; K+DCan USB cable required

⚠️ Note: Wireless ELM327 adapters may not work reliably with vehicles before 2008.

🔌 Recommended OBD Adapters

🔗 Trusted Adapter Options

• Vgate vLinker MC/FS/BM/FD: Shop on VGateMall
• UniCarScan UCSI-2000 / UCSI-2100: Set to D-Can Mode: MODE2
  WGSoft | BMDiag UK
• Carista OBD2 Adapter: caristaapp.com/adapter
• Veepeak OBDCheck BLE: Veepeak Product Page

📋 Quick Start Guide

1. Connect the OBD2 adapter to your car’s OBD2 port (under the steering column).
2. Turn ignition to ON (without starting the engine).
3. Connect to your phone:
   • USB: Use USB-OTG cable. Select bimmer-tool when prompted.
   • Bluetooth: Pair via phone settings (PIN: 0000 or 1234).
   • Wi-Fi: Turn off mobile data. Connect to adapter’s Wi-Fi network.
4. Open bimmer-tool, go to “Car”, and select your model and year.
5. Go to “Connection”, choose:
   • Connection type (USB/Bluetooth/WiFi)
   • Adapter type
   • Communication protocol (e.g., K+DCAN, D-Can)
6. Tap “Connect” and begin diagnostics.

❗ Common Issues & Fixes

🔐 Why Does the App Need Permissions?

🔒 No location data is collected or stored.

📈 What’s New in v3.7.6-L (Released: Nov 10, 2024)

• ✅ Diesel Idle Speed Adjustment – Fine-tune engine idle for performance or emissions.
• ✅ Throttle Body Control – Manual adjustment and calibration support.

📩 Need Help?

If you have questions, troubleshooting issues, or need support:

• Email us (address available at the bottom of the app’s website).
• Visit: Official bimmer-tool Website

✅ Pro Tip: Always use a reliable, compatible OBD2 adapter to avoid connectivity issues and ensure full functionality.

Let me know if you'd like a printable PDF version, a checklist, or setup guide for a specific BMW model!